Electra Elite IPK II Document Revision 1
IPK II In-Mail 2 - 497
Related Features
Barge-In
Caller ID
Call Forwarding, Fixed
Central Office Calls, Placing
Clock/Calendar Display
Direct Inward Line (DIL)
Hold
Message Waiting
One-Touch Calling
Programmable Function Keys
Transfer
Programming
10-09-01 DTMF and Dial Tone Circuit Setup
Assign at least one circuit for DTMF reception (type 0 or 1).
Use the following as a guide when allocating DTMF receivers:
H
In light traffic sites, allocate one DTMF receiver for every 10 devices that use them.
H
In heavy traffic sites, allocate one DTMF receiver for every five devices that use them.
11-07-01 Department Group Pilot Numbers
Assign a Department Group pilot number for the Voice Mail (8 digits maximum). The extensions
are assigned to the group in Program 16-02-01.
11-12-52 Service Code Setup (for Service Access)
Define access code used for In-Mail Live Monitoring (VRS). At default this program is not set.
15-02-08 Message Waiting LED Color
This option allows you to select whether the Message Wait LED located at the top of the
multiline terminal will flash green (0) or red (1) when a Message Wait indication is flashing. By
default, this option is set to "1" (red).
To Next Page
Loading...
