Document Revision 1 Electra Elite IPK II
2 - 30 Alphanumeric Display
Related Features
Clock/Calendar Display
Detail Status Display on Multi-Telephone
Intercom Abandoned Call Display
Selectable Display Messaging
Programming
11-11-13 Service Code Setup (for Setup/Entry Operation)
If needed, redefine the service code used to select the language for display multiline terminals
(default: 678).
15-02-01 Multiline Telephone Basic Data Setup - Display Language Selection
Select the language to be displayed on a multiline terminal display.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
20-11-08 Class of Service Options (Hold/Transfer Service) - Transfer Display
In an extension’s Class of Service, enable (1) or disable (0) an extension’s incoming transfer
pre-answer display.
Operation
Operation is automatic if enabled in programming.
0 = Japanese 4 = Italian 8 = Norwegian
1 = English 5 = Spanish 9 = Danish
2 = German 6 = Dutch
3 = French 7 = Portuguese
To Next Page
Loading...
