NEC ELECTRA ELITE IPK II - Page 576

Document Revision 1 Electra Elite IPK II
2 - 554 Last Number Redial
Related Features
Automatic Route Selection (ARS)
Repeat Redial
Save Number Dialed
Programming
 11-12-12 Service Code Setup (for Service Access) - Last Number Dial
Assign a service code (#5) to use Last Number Dial.
 11-12-17 Service Code Setup (for Service Access) - Clear Last Number Dialing Data
Assign a service code (776) to clear the Last Number Dial.
 15-02-13 Multiline Telephone Basic Data Setup - Redial List Mode
Select the type of numbers that will be stored in the Redial List - Internal and External numbers
(0) or External only (1).
Operation
To redial your last call:
1. Without lifting the handset, press the Redial key.
 The last dialed number is displayed.
2. To redial the last number, press #.
- OR -
Search for the desired number from the Redial List by pressing the Redial key or VOLUME  or
VOLUME  keys.
3. Lift the handset or press Speaker to place the call.
 The system automatically selects a trunk from the same group as your original call and dials the last number
dialed.
- OR -