NEC ELECTRA ELITE IPK II - Page 595

Electra Elite IPK II Document Revision 1
Meet Me Paging Transfer 2 - 573
Dial , 1 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for
Internal/External All Call).
3. Announce the call.
4. From a multiline terminal, when the paged party answers, press the Transfer key or the Transfer
softkey.
- OR -
From a single line telephone, when the paged party answers, hang up.
 The party is transferred.
To join a Meet Me External Paging Transfer:
1. At the multiline terminal, press the Speaker key or pick up handset.
- OR -
At single line telephone, lift the handset.
2. Dial 765.
3. Dial the announced External Paging Zone (0~8).
 You connect to the Paging party.
4. Stay on the line.
From a multiline terminal, press the Transfer key or the Transfer softkey.
- OR -
From a single line telephone, hang up.
 The party is transferred.
Meet Me Internal Paging Transfer
To make a Meet Me Internal Paging Transfer:
1. At multiline terminal, while on a call, press Hold.
- OR -
At the single line telephone, while on a call, hookflash.
2. Press Internal Paging Zone key (PGM 15-07 or SC 751: 20 + zone).
- OR -
Dial 701 and the Internal Paging Zone code (0~9 or 00-64).
- OR -
Dial , 1 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for
Internal/External All Call).
3. Announce the call.