Document Revision 1 Electra Elite IPK II
2 - 582 Message Waiting
Operation
To leave a Message Waiting:
1. Call busy or unanswered extension.
2. Dial 0 or press Message Waiting key (PGM 15-07 or SC 751: 38)
3. Hang up.
With multiline terminal telephones, the MW LED lights.
To answer a Message Waiting:
When you have a message, your MW LED flashes fast for multiline terminals.
1. At the multiline terminal, press the Speaker key and dial
,
0.
- OR -
Press the Message Waiting key (PGM 15-07 or SC 751: 38).
- OR -
At the single line telephone, lift the handset and dial
,
0.
If the called extension does not answer, dial 0 or press your Message Waiting key to automatically leave them a
message.
Normally, your MW LED goes out. If it continues to flash, you have new messages in your “Voice Mail” mailbox
or a new “General Message”. Go to “To check your messages” below.
To cancel all your Messages Waiting:
This includes messages you have left for other extensions and messages other extension have left for you.
1. At the multiline terminal, press the Speaker key.
- OR -
At the single line telephone, lift the handset.
2. Dial 773.
3. Hang up.
To cancel the Messages Waiting you have left at a specific extension:
1. At the multiline terminal, press the Speaker key.
- OR -
At the single line telephone, lift the handset.
2. Dial 771.
3. Dial number of extension you do not want to have your messages.
To Next Page
Loading...
