Document Revision 1 Electra Elite IPK II
2 - 586 Microphone Cutoff
Related Features
Handsfree Answerback/Forced Intercom Ringing
Handset Mute
Programmable Function Keys
Programming
15-07-01 Programmable Function Keys
If an extension needs handset microphone cutoff, program a Handset Transmission Cutoff key
(code 40). To program a MIC Cutoff key, use code 02 as the entry. The MIC Cutoff key will mute
conversation on a handsfree call, while the Handset Transmission Cutoff key will mute the
handset transmission on a non-handsfree call.
20-02-11 System Options for Multiline Telephones - Handsfree Microphone Control
Use this option to control the setting for multiline terminal’s handsfree microphone after being
disconnected and reconnected. If set to 0, the microphone will always be off when the terminal is
reconnected. If set to 1, the microphone remains in the same state it was in when the terminal is
reconnected.
Operation
To mute your telephone’s handset or Handsfree microphone while on a call:
1. Press MIC.
This only turns off the Handsfree microphone.
- OR -
Press the Microphone Cutoff key (PGM 15-07 or SC 751: 40).
This turns off both the handset and Handsfree microphone.
To turn your telephone’s microphone back on:
1. Press MIC.
Use MIC only if you pressed it initially to turn off your Handsfree microphone.
- OR -
Press the Microphone Cutoff key (PGM 15-07 or SC 751: 40).
Use the Microphone Cutoff key only if you pressed it initially to turn off your handset or Handsfree microphone.
To Next Page
Loading...
