Electra Elite IPK II Document Revision 1
Off-Hook Signaling 2 - 627
Required Component(s)
None
Related Features
Callback
Call Waiting/Camp-On
Direct Inward Dialing (DID)
Handsfree and Monitor
Hotline
Intercom
One-Touch Calling
Programmable Function Keys
Reverse Voice Over
Single Line Telephones, Analog 500/2500 Sets
Programming
11-12-03 Service Code Setup (for Service Access) - Override (Off-Hook Signaling)
Assign a service code (809 by default) to be used for Off-Hook Signaling Override.
11-16-04 Single Digit Service Code Setup - Intercom Off-Hook Signaling
Assign a one-digit service code to be used for Off-Hook Signaling.
15-02-12 Multiline Telephone Basic Data Setup - Off-Hook Ringing
For each extension, set Off-Hook Ringing type: 0 (muted), 1 (none), 3 (beep in speaker), 4 (beep
in handset). DID, DNIS and DIL trunks can use any of the 4 options - normal/ring group trunks
can only use options “0” or “1”.
15-07-01 Programmable Function Keys
Assign a function key for Off-Hook Signaling (code 33).
To Next Page
Loading...
