Electra Elite IPK II Document Revision 1
Park 2 - 649
Related Features
Caller ID
Call Arrival Keys (CAR)
Direct Station Selection
Hold
Programmable Function Keys
Programming
11-12-31 Service Code Setup (for Service Access) - Park
Set the service code which should be used for placing a call in Park (default: #6).
11-12-32 Service Code Setup (for Service Access) - Park Answer
Set the service code which should be used for answering a call in Park (default:
,
6).
11-12-35 Service Code Setup (for Service Access) - Personal Park
Set the service code to be used for placing a call in a Personal Park (default: 757).
11-16-11 Single Digit Service Code Setup - Personal Park
Customize the one-digit service code to be used when placing a call in Personal Park (default:
No setting).
15-02-08 Automatic Handsfree
Use this option to set whether pressing a One-Touch key will pre-select the key or go off -hook
and access the key. 0 = Pre-select, 1 = One-Touch (Automatic Handsfree).
15-07-01 Programmable Function Keys
Assign a keys as a Park Orbit key (code
,
04 plus Park orbit number [01~64]) or as a Personal
Park key (code
,
07).
15-18-01 Virtual Extension Key Operation Mode
This program sets whether an incoming call to a Virtual Extension/CAR resides on the Virtual
Extension/CAR key once answered (1) or appears on a CAP Key/CO Appearance Line key (0).
This setting applies to Multiline Terminals single line telephone and virtual extension numbers
(default: 0).
20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to extensions.
To Next Page
Loading...
