Document Revision 1 Electra Elite IPK II
2 - 656 PBX Compatibility
21-04-01 Toll Restriction Class
Assign a Toll Restriction Class (1-15) to each extension.
21-05-12 Toll Restriction Class - PBX Call Restriction
For each Toll Restriction Class, enter 1 to restrict calls on the PBX trunk to outside calls only.
Enter 0 to allow users to dial PBX extensions.
21-06-08 Toll Restriction Table Data Setup - PBX Access Code
Enter the system PBX access codes. The system can have up to 4 groups of codes. A code
can be one or two digits long. Valid entries are 0~9, # and
,
. Use Line Key 1 as a “don’t care”
digit. If using Account Codes, do not use the
,
within the PBX Access Code.
Operation
To place a call over a PBX trunk:
1. At multiline terminal, press the Speaker key and dial 704.
- OR -
At single line telephone, lift the handset and dial 704.
2. Dial PBX trunk group number (1~9 or 001~100).
3. Dial PBX access code and number.
- OR -
1. (Multiline terminal only) Press PBX trunk group key (PGM 15-07 or SC 752:
,
02 + group).
2. Dial PBX access code and number.
- OR -
1. At multiline terminal, press the Speaker key and dial 9.
- OR -
At single line telephone, lift the handset and dial 9.
2. Dial PBX access code and number.
- OR -
To Next Page
Loading...
