Electra Elite IPK II Document Revision 1
Private Line 2 - 677
14-01-09 Basic Trunk Data Setup - Private Line
Determine if a trunk should be used as a normal (0) or private (1) line.
15-06-01 Trunk Access Map for Extensions
Assign extension to have Private Line to an unused “Private Line” Access Map.
Trunk Access Maps: 1~200
15-07-01 Programmable Function Keys
Make sure extension has a line key (e.g., 012) for the Private Line.
Trunks: 1~200
21-02-01 Trunk Group Routing for Extensions
Change the routing as needed.
22-02-01 Incoming Call Trunk Setup
Set the Trunk Service Type to 4 if routing unanswered Private Lines to voice mail or 0 if not
routing to voice mail.
Ring Groups: 1~100
22-04-01 Incoming Extension Ring Group Assignment
Assign extension to Private Line’s ring group. Set the ringing in Program 22-06 - use option 1 for
Incoming or Both Ways Private Lines. Use option 0 for Outgoing Private Lines. Do not assign
any other extensions to the Private Line ring group.
22-05-01 Incoming Trunk Ring Group Assignment
Assign Private Line to an unused “Private Line” ring group (i.e., a ring group just for the Private
Line).
Ring Groups: 1~100
22-07-01 DIL Assignment
If routing unanswered Private Lines to voice mail, assign DILs to the extensions.
To Next Page
Loading...
