Electra Elite IPK II Document Revision 1
Selectable Ring Tones 2 - 741
15-10-01 Incoming Virtual Extension Ring Tone Order Setup
Set the priority (1-4) for the Virtual Extension Ring Tones set in Program 15-08. When Virtual
Extension calls ring an extension simultaneously, the tone with the highest order number (e.g.,
1) rings. The other keys just flash.
22-03-01 Trunk Ring Tone Range
Select the ring tone range for the trunk. The trunk uses a ring tone within the range selected
when it rings an extension. There are four ring tones available.
Operation
To change your extension’s incoming ring tones:
1. Press the Speaker key.
2. Dial 720.
3. Dial 1 to set Intercom ring; 2 to set trunk ring.
4. Dial code for the desired ring pattern (1~8).
5. Press Speaker to hang up.
To listen to the incoming ring choices:
1. Press the idle Speaker key.
2. Dial 711.
3. Dial 1 to listen to Intercom ring; 2 to listen to trunk ring.
4. For Intercom Ring:
Dial the code for the ring pattern you want to hear (1~8).
- OR -
For Trunk Ring:
Dial code for the ring pattern you want to hear (Ring 1~3, Melody 4~8). If you select Ring 1~3, a
second screen will prompt for the tone pattern (1~4).
5. Press the Speaker key to hang up.
To Next Page
Loading...
