EasyManua.ls Logo

NEC ELECTRA ELITE IPK II - Page 792

NEC ELECTRA ELITE IPK II
996 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document Revision 1 Electra Elite IPK II
2 - 770 Station Hunt
Programming
16-01-03 Department Routing When Busy
Assign if a call to busy station will hunt (1) or not hunt (0) to the next available member of the
Hunt Group (Department Group).
Refer Department Calling on page 2-251 to set up the Department Group.
20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to an extension.
20-09-07 Class of Service Options (Incoming Call Service) - Call Queuing
In an extension Class of Service, enable (1) or disable (0) Call Queuing to the extension. This
must be set to (0) for Station Hunting to work.
20-13-06 Class of Service Options (Supplementary Service) - Automatic Off-Hook Signaling
In an extension Class of Service, allows a busy extension to manually (0) or automatically (1)
receive off-hook signals. This must be set to (0) for Station Hunting to work.
Related Features
Department Calling
Department Step Calling
Operation
To make a Step Call:
1. Place a call to a busy extension.

Table of Contents

Other manuals for NEC ELECTRA ELITE IPK II

Related product manuals