EasyManua.ls Logo

NEC ELECTRA ELITE IPK II - Page 831

NEC ELECTRA ELITE IPK II
996 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electra Elite IPK II Document Revision 1
T1 Trunking (with ANI/DNIS Compatibility) 2 - 809
34-09-07 ANI/DNIS Service Options - Routing on ANI/DNIS Error
This option lets you determine how the system will handle an ANI/DNIS call if a data error is
detected in the incoming data string (0 = Play busy tone to caller, 1 = Route the caller to the ring
group specified in Program 25-03).
34-09-08 ANI/DNIS Service Options - Routing When Destination Busy or No Answer
This option lets you determine how the system will handle an ANI/DNIS call if destination is busy
or does not answer (0 = Play busy or ringback tone to caller, 1 = Route the caller to the ring
group specified in Program 25-04).
34-09-09 ANI/DNIS Service Options - Calling Number Address Length
When Item 1=0 (ANI/DNIS receive format is address), use this option to specify the address
length. The choices are from 1 to 8 digits in length.
Operation
Refer to the operation for the following features:
J
Central Office Calls, Answering
J
Central Office Calls, Placing
J
Direct Inward Dialing (DID)
J
Tie Lines

Table of Contents

Other manuals for NEC ELECTRA ELITE IPK II

Related product manuals