Electra Elite IPK II Document Revision 1
Tandem Trunking (Unsupervised Conference) 2 - 821
14-01-13 Basic Trunk Data Setup - Loop Disconnect Supervision
For each trunk, enter 1 to enable loop supervision.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
20-07-11 Class of Service Options (Administrator Level) - Forced Trunk Disconnect
In an extension’s Class of Service, enter 1 to enable Forced Trunk Disconnect. This allows the
extension to disconnect an Unsupervised Conference in progress (initially set up using Method
B).
20-11-11 Class of Service Options (Hold/Transfer Service) - Auto On-Hook Transfer
In an extensions's Class of Service, Disable (0) or Enable (1) an extensions ability to transfer
when the user hangs up.
20-11-14 Class of Service Options (Hold/Transfer Service) - Trunk-to-Trunk Transfer
Disable (0) the Trunk-to-Trunk Transfer Restriction option.
20-11-21 Class of Service Options (Hold/Transfer Service) - Restriction for Tandem Trunking on
Hang Up
Allow (0) an extension user’s ability to set up a tandem call automatically when they hang up.
24-02-07 System Options for Transfer - Trunk-to-Trunk Transfer Release Warning Tone
This timer will start when a trunk begins talking with another trunk (for example: trunk-to-trunk
transfer, outgoing from trunk, Tandem Trunking) (0~64800 seconds).
24-02-10 System Options for Transfer - Trunk to Trunk Transfer Disconnect Time
This timer will start after the Trunk to Trunk warning tone is heard.(0-64800 seconds)
25-07-07 System Timers for VRS/DISA -DISA/Tandem Trunking Long Conversation Warning Tone
Time
Determine the length of time a DISA caller or any trunk-to-trunk (such as Tandem Trunking)
conversation can talk before the Long Conversation tone is heard (0~64800 seconds).
25-07-08 System Timers for VRS/DISA - DISA/Tandem Trunking Long Conversation Disconnect
This timer determines how long the system will wait before disconnecting a a DISA or any
trunk-to-trunk (such as Tandem Trunking) call after the Long Conversation tone is heard
(0~64800 seconds).
Tandem Trunking Method D - Tandem Trunking to Abbreviated Dial Number
10-07-01 Conversation Record Circuits
The number of circuits assigned as Conversation Record circuits limits the number of available
conference circuits. Make sure there are circuits available for a conference.
11-10-06 Service Code Setup (for System Administrator) - Setting the Automatic Forwarding for
Each Trunk Line
If the default service code (733) for enabling Automatic Tandem Trunking feature is not
acceptable, change the code as required.
To Next Page
Loading...
