Electra Elite IPK II Document Revision 1
Tandem Trunking (Unsupervised Conference) 2 - 827
4. Dial the desired time mode (Time Mode: 1~8).
5. Press Hold.
6. Hang up.
To disconnect the Conference, Forced Trunk Disconnect (i.e., Press the line key or #9 plus the trunk number +
∗3).
Continue/Disconnect Code
To use the Continue code to extend a Tandem Trunk call:
1. An external call connects to an external number (either by transferring with Tandem Trunking or by
DISA caller).
2. After the programmed time (Program 24-02-07), a warning tone is heard and the user dials the
Continue code (Program 20-28-01) to extend the conversation.
3. After the programmed time (Program 20-28-03), the warning tone is heard again. After the
programmed time (Program 24-02-10), the call is disconnected.
To Next Page
Loading...
