Document Revision 1 Electra Elite IPK II
2 - 834 Tone Override
Related Features
Call Waiting/Camp-On
Data Line Security
Programming
11-12-03 Service Code Setup (for Service Access) - Override (Off-Hook Signaling)
Assign a service code (709 by default) to be used for Off-Hook Signaling Override.
11-16-04 Single Digit Service Code Setup - Intercom Off-Hook Signaling
Assign a one-digit service code (* by default) to be used for Off- Hook Signaling.
15-02-12 Multiline Telephone Basic Data Setup - Off-Hook Ringing
For each extension, set Off Hook Ringing type: 0 (Muted), 1 (None), 3 (Beep in Speaker), 4
(Beep in Handset), 5 (Beep in Handset and Speaker).
15-07-01 Programming Function Keys
Assign a function key for Off -Hook Signaling (code 33).
20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
20-09-01 Class of Service Options (Incoming Call Service) - Second Call for DID/DISA/ DIL/ E&M
Enable (1) or disable (0) an extension’s ability to receive a second call from a DID, DISA, DIL, or
tie line caller.
20-09-07 Class of Service Options (Incoming Call Service) - Call Queuing
For each extension disable (0) or enable (1) the extensions ability to have multiple calls queued
at the extension. If Allowed, Tone Override is automatic. Refer to PRG 20-13-06.
20-13-05 Class of Service Options (Supplementary Service) - Off Hook Signaling Receive
In an extension’s Class of Service, enable (1) or disable (0) the extension’s ability to receive Off-
Hook Signaling.
20-13-06 Class of Service Options (Supplementary Service) - Automatic Off-Hook Signaling
In an extension’s Class of Service, enable (1) or disable (0) the extension’s ability to
automatically send Off Hook Signals while busy on a handset call. Used when PRG 20-09-07 is
set to disable (0).
20-13-34 Class of Service Options (Supplementary Service) - Block Manual-Off Hook-Signaling
Turn off (0) or on (1) an extension’s ability to block off-hook signals manually sent from a
coworker.
To Next Page
Loading...
