Document Revision 1 Electra Elite IPK II
2 - 854 Trunk Group Routing
Service, which is in turn determined by the password the caller dial. Program 14-06 is used to
set up the Trunk Group Routing.
Trunk Group Routes: 1~100
34-03-01 Trunk Group Routing for E&M Tie Lines
Use this program to assign the Trunk Group Route chosen when a user seizes a tie line and
dials 9. Set Trunk Group Routing in Program 14-06. If the system has ARS, dialing 9 accesses
ARS.
Trunk Group Routes: 1~100
Operation
To place a call using Trunk Group Routing:
1. At the multiline terminal, press the Speaker key.
- OR -
At single line telephone, lift the handset.
2. Dial 9.
3. Dial number.
- OR -
1. At the multiline terminal, press Trunk Group Routing key (PGM 15-07 or SC 752: ∗05).
Also refer to the Call Appearance (CAP) Keys on page 2-87.
2. Dial the number.
To Next Page
Loading...
