Electra Elite IPK II Document Revision 1
Voice Mail Integration (Analog) 2 - 913
Related Features
Barge-In
Caller ID
Central Office Calls, Placing
Clock/Calendar Display
Direct Inward Line (DIL)
Hold
Message Waiting
One-Touch Calling
Programmable Function Keys
Transfer
Voice Response System (VRS)
Programming
10-09-01 DTMF and Dial Tone Circuit Setup
Assign at least one circuit for DTMF reception (type 0 or 1).
Use the following as a guide when allocating DTMF receivers:
H
In light traffic sites, allocate one DTMF receiver for every 10 devices that use them.
H
In heavy traffic sites, allocate one DTMF receiver for every five devices that use them.
11-07-01 Department Group Pilot Numbers
Assign a Department Group pilot number for the Voice Mail (8 digits maximum). The extensions
are assigned to the group in Program 16-02-01.
15-02-26 Multiline Telephone Basic Data Setup, MSG Key Operation Mode
Determine whether an extension’s MSG key should function as a Message key (0) or Voice Mail
key (1) (Default = 0). If set as a Message key, the user will be able to press the key to call the
voice mail only when they have new messages. If set as a Voice Mail key, it will function as a
normal Voice Mail key (it will not be active if Centralized Voice Mail is used).
To Next Page
Loading...
