Electra Elite IPK II Document Revision 1
Voice Over 2 - 929
Required Component(s)
None
Related Features
Conference
Off-Hook Signaling
Programmable Function Keys
Programming
11-12-41 Service Code Setup (for System Access) - Voice Over
The service code used for the Voice Over feature (default: 790).
11-16-08 Single Digit Service Code Setup (from System Access) - Voice Over.
Service code used for the Voice Over feature (default: 6).
15-07-01 Programmable Function Keys
Assign a function key for Voice Over (code 48).
20-06-01 Class of Service for Extensions
Assign a Class of Service (1-15) to an extension.
20-13-06 Class of Service Options (Supplementary Service) - Automatic off-hook Signaling
In an extension’s Class of Service, enter 1 if you want callers to a busy extension to hear busy/
ring tone. Enter 0 if you want callers to hear busy tone. (The caller must then dial 7 to activate
Intercom Off-Hook Signaling.)
21-01-03 System Options for Outgoing Calls - Trunk Interdigit Time (External)
Program how long an extension must wait before using the Voice Over feature can be used on a
call (this timer waits until this timer expires before putting a call in a talk state). This timer also
affects Barge-In.
To Next Page
Loading...
