EasyManua.ls Logo

NEC ELECTRA ELITE IPK II - Page 954

NEC ELECTRA ELITE IPK II
996 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document Revision 1 Electra Elite IPK II
2 - 932 Voice Over Internet Protocol (VoIP)
To connect a telephone to a LAN connection, the system allows the use of an Electra Elite IPK II digital
IP 16-button multiline terminal (referred to as Electra Elite IPK II IPhone), an Electra Elite IPK II digital
multiline terminal with an IP Adapter installed.
If connecting a LAN to a WAN (wide area network), follow the instructions included with the ADSL
modem or gateway device.
IP Address
Equipment/devices used in the Electra Elite IPK II LAN setup must have an IP address assignment. An
IP address assigns a unique address for each device. There are two types of IP addresses: Private and
Global. A Private IP address is not accessible through the internet - a Global IP address can be
accessed through the internet.
With a Private IP address, with equipment that does not access the internet directly, addresses can be
assigned to the equipment within Class A, B or C by assigning a number within the class’s range of
numbers.
Class Allowed IP Address
Recommended
Environment
A 10.0.0.0 ---10.22.255.255 Large Scale Network
B 172.16.0.0 --- 172.31.255.255 Mid Scale Network
C 192.168.0.0 --- 192.168.255.255 Small Scale Network
IPK II CPU
Switch
10Base - T/100 Base-T
(100Base-TX is
recommended)
PVA or IAD
HUB Card
(Switching Hub)
IPK II CPU
IPK II CPU

Table of Contents

Other manuals for NEC ELECTRA ELITE IPK II

Related product manuals