NEC Univerge SV8100 - Page 1060

Issue 1.0 UNIVERGE SV8100
2 - 1036 SV8100 NetLink
51-11-01 Net-Link System Information –
System Name
For reference only. (default not assigned)
3
51-11-02 Net-Link System Information –
Connected State
For reference only. (default = 0)
3
51-11-03 Net-Link System Information – IP
Address
For reference only. (default =
000.000.000.000)
3
51-11-04 Net-Link System Information –
MAC Address
For reference only. (default =
00:00:00:00:00:00)
3
51-11-05 Net-Link System Information –
Primary Priority Level
For reference only. (default = 0)
3
51-11-06 Net-Link System Information –
Main Software Version
For reference only. (default = XX.XX)
3
51-12-01 Primary System Information –
System ID
For reference only. (default = 0)
3
51-12-02 Primary System Information –
System Name
For reference only. (default not assigned)
3
51-12-03 Primary System Information – IP
Address
For reference only. (default =
000.000.000.000)
3
51-12-04 Primary System Information –
MAC Address
For reference only. (default =
00:00:00:00:00:00)
3
51-12-05 Primary System Information –
Primary Priority Level
For reference only. (default = 0)
3
51-12-06 Primary System Information –
Main Software Version
For reference only. (default = XX.XX)
3
51-13-01 Net-Link Options– Automatic IP
Address List Operation Update
When set to 1 (On), the list in
Program 51-03-01 is automatically
updated.
0 = Disable (Off)
1 = Enable (On)
(default = 1)
3
51-13-02 Net-Link Options– Time Zone
Option
When set to 0, the following features
are affected: Clock Display,
Incoming/Outgoing History List.
When set to 1, the following features
are affected: VRS Time Announce,
Date and Time Setting Service
Code, Alarm Clock setting.
0 = Off
1 = On
(default = 0)
3
51-13-03 Net-Link Options– MAC Address
Authorization Enable
Refers to Program 51-02-04 for
setting MAC address.
0 = Disable (Off)
1 = Enable (On)
(default = 0)
3
51-14-01 Net-Link System Control – Delete
System Information
This command is used to delete
system information and the slot
information. The system must be
disconnected.
1~50
(default = 1)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3