NEC Univerge SV8100 - Page 1369

UNIVERGE SV8100 Issue 1.0
Codes Tables 3 - 29
Paging, Internal Code: 21 + zone
(1~8, 1~9 or 01~64)
Operation: Press key
Broadcasting to an
Internal Paging Zone
On red when
activated
701 + zone
Code: 2
Operation: Press key
Broadcasting to all Internal
Paging zones
On red when
activated
701 + 0 or
00
Park Code:
04 + orbit (1~9
or 01~64)
Operation: Place or
answer call + Press
key
Placing a call into or
retrieving a call from a
Park Orbit
Fast flash when
orbit is busy
(green at
originator, red at
others)
#6 (Park)
6 (pickup)
Repeat Redial Code: 29
Operation: Place call
and press key
Activating Repeat Redial
while on a call
Fast Flash while
system waits to
redial
-
Reverse Voice Over Code: 47 + dest. ext.
Operation: Press and
hold key
Initiating Reverse Voice
Over
Full BLF red -
Room Monitor Code: 39
Operation: Press key
at destination & source
+ ext
Activating Room Monitor Dest. Fast Flash
red, Source Hold
Flash red
-
Save Number Dialed Code: 30
Operation:
Save
: Place call +
Press key
Redial
: Line or Speaker
key + Press key
Saving, redialing or
checking a saved number
None -
Secretary Call
(Buzzer)
Code: 41 + sec. ext
Operation: Press key
Calling your secretary
(using the buzzer)
On red at source
Fast Flash red at
destination
-
Secretary Call Pickup Code: 42 + boss ext
Operation: Press key
A secretary picking up a
call ringing your boss’s
extension
On red when
activated
-
Selectable Display
Messaging
Code: 18
Operation: Press key
+ additional data if
needed
Setting up Call Forwarding
Off-Premise, Selectable
Display Messaging, VRS
Park and Page and VRS
Personal Greeting
Flashes red when
activated
-
Serial Call Code: 43
Operation: Trk call +
Hold + ext + Press key
Placing a Serial Call to a
co-worker
None -
Step Call Code: 36
Operation: Press key
Stepping through a
department group
None #
To program a key, press Speaker, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
press the key and enter the code (e.g., 48 for Voice Over).
For this feature... Use this key... When your are... Key Lamp Status
Also See
Srvc Code