UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 209
Related Features
Automatic Route Selection
Call Arrival (CAR) Keys
Caller ID Call Return
Conference, Voice Call/Privacy Release
D
term
Cordless II Telephones /D
term
Cordless Lite II Telephones
Park
Speed Dial – System/Group/Station
Station Message Detail Recording
T1 Trunking (with ANI/DNIS Compatibility)
VM8000 InMail
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
10-02-04 Location Setup – Area Code Enter the local area code. (default not assigned)
3
10-02-05 Location Setup – Trunk Access
Code
Enter the trunk access code digits
required to place an outgoing call.
Dial up to eight digits
0~9,
, #
(default not assigned)
3
To Next Page
Loading...
