NEC Univerge SV8100 - Page 237

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 213
Operation
Storing a Number
To store a Caller ID number in an Speed Dial bin:
1. With a multiline terminal idle the display shows:
2. Press the LIST Softkey. The display shows:
3. Press the CID Softkey (Caller ID). The display shows:
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
↑ = Preview List
↓ = Next List
Store = Store in List
DEL = Delete from List
4. Press the STORE Softkey. The display shows:
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
STA = Store in Station Speed Dial bin.
SYS - Store in System Speed Dial bin.
90-04-01 Load Data Use to load the system data from
the inserted Compact Flash
Memory to the SRAM and Flash
ROM in the system.
Also, used to load stored Caller ID.
Dial 1 + press Hold
(Press Hold to cancel.)
3
1-01 FRI 09:00AM
301 STA 301
LIST DIR ICM PROG
LIST MENU
Redial CID
##: xxxxxxxxxxxxx
mm-dd hh:mm
↑ ↓ Store DEL
##: xxxxxxxxxxxxx
mm-dd hh:mm
STA SYS
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3