NEC Univerge SV8100 - Page 249

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 225
15-06-01 Trunk Access Map for
Extensions
Assign Trunk Access Maps to
extensions.
Trunks 1~200
(default = 1)
3
15-07-01 Programmable Function Keys Use to assign functions to multiline
terminal line keys.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

00 ~

99
(Appearance Function
Code) (Service Code
752 by default)
3
20-02-09 System Options for Multiline
Telephones – Disconnect
Supervision
Use this option to Enable (1) or
Disable (0) disconnect supervision
for the system trunks.
0 = Disable
1 = Enable
(default = 1)
3
20-02-15 System Options for Multiline
Telephones – Caller ID Display
Mode
Use to define the Caller ID display
mode for multiline terminals.
0 = Name and Number
(Both)
1 = Name
2 = Number
(default = 0)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
20-10-07 Class of Service Options
(Answer Service) – Automatic
Off-Hook Answer
Turns Off (0) or On (1) an extension
to use Universal Auto Answer (no
service code required).
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-13 Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
Turns Off (0) or On (1) the
extension ability to use Continued
Dialing, which allows DTMF signal
sending while talking on extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-23 Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
Select whether an extension should
display the reason a call is being
transferred to their extension (Call
Forward Busy, Call Forward No
Answer, DND).
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
21-01-15 System Options for Outgoing
Calls – Outgoing Disable on
Incoming Line (Toll Restriction)
Enable (1) or Disable (0) the
Outgoing Disable on Incoming Line
feature.
0 = Disable
1 = Enable
(default = 1)
3
21-01-16 System Options for Outgoing
Calls – Supervise Dial Detection
Timer
With the Outgoing Disable on
Incoming Line feature, if dial tone is
not detected after the extension
answers an incoming line, the
system determines the call is
unable to complete and releases
the DTMF receiver.
0~64800 (seconds)
(default = 20 seconds)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3