NEC Univerge SV8100 - Page 988

Issue 1.0 UNIVERGE SV8100
2 - 964 Speed Dial – System/Group/Station
15-07-01 Programmable Function Keys Assign a function key for System
Speed Dialing (27) or Group Speed
Dialing (28). You can program the
key as either a general Speed
Dialing key or you can choose to
store a bin number with the function
key. This key would then always dial
the associated bin number. If storing
a bin number along with the code, do
not store 0, 00 or 000. To bypass
entering a bin number, press Hold
(Hold is also required if
programming the function key using
the service code 751).
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

00 ~

99 (Appearance
Function Code) (Service
Code 752 by default)
3
15-14-01 Programmable One-Touch Keys –
Station Speed Dial Data
Assign the extensions Speed Dial
number (1~10).
1~0, , #, Pause,
Hookflash,
@ (Code for
Answer-Wait)
Up to 24 digits
(default not assigned)
3
15-14-02 Programmable One-Touch Keys –
Station Speed Dial Name
Assign the name associated with the
extension Speed Dial Bin (1~10).
Name
(default not assigned)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
3
20-07-04 Class of Service Options
(Administrator Level) – Storing
Speed Dialing Entries
Turns Off (0) or On (1) an extension
to store System or Group Speed
Dialing numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-03 COS Options (Outgoing Call
Service) – System Speed Dialing
Turns Off (0) or On (1) an extension
ability to make outbound calls using
system speed dial numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-04 COS Options (Outgoing Call
Service) – Group Speed Dialing
Turns Off (0) or On (1) an extension
ability to make outbound calls using
group speed dial numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
30-03-01 DSS Console Key Assignment For DSS Console Chaining, assign
an Speed Dialing Service Code (or )
plus a 2-digit bin number to a DSS
Console key.
Key Number
001~500
0~99 (General
Functional Level)
97 = Door Box Access
key (additional data: 1~8
Door Box No.)

00 ~  99
(Appearance
Functional
Level)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3