NEC Univerge SV8300 - Page 152

Chapter 5 System Data Mode
5-8 NWA-033628-001 Rev.1.0
Using System Data Mode
: Default
CM10
Y 1ST DATA 2ND DATA
No. MEANING
DATA MEANING DATA MEANING
0 Blade Type XX ZZ XX : Unit No. (01-50)
ZZ : Slot No. (01-18)
60 ISDN Line Circuit Blade
(CD-2BRIA)
70 In-Skin UMS Blade
(CD-VM00)
NONE No data
1 Trunk Blade number 000
127
Trunk Blade number 000
Trunk Blade number 127
NONE No data
Y 1ST DATA 2ND DATA
No. MEANING
DATA MEANING DATA MEANING
00 TDM terminal/Trunk
registration
XXYYZZ Physical Port number
XX: Unit number (01-50)
YY: Slot number (01-18)
ZZ: Circuit number
(01-32)
X-
XXXX
XXXX
Single Line station number (1-8
digits)
X: 0-9, A (*), B (#)
D000
D511
Trunk number (C.O./Tie Line,
Paging, Radio Paging)
E100
E131
DSS Console number (00-31)
EC00
EC31
Add-on Module number
00 TDM terminal registration EE3 XXX Blade number of CS/ZT Inter-
face XXX represents CS/ZT
number (000-127).
EFX
EF
XXXX
XXXX
ISDN line station number
X-XXXXXXXX represents
ISDN line station number.
X: 0-9, A (*), B (#)
Continued on next page
~ ~
~~~ ~