Chapter 6 Command Mode
6-8 NWA-033628-001 Rev.1.0
Using Command Mode
<Resetting System Data (Second Data) to Its Default>
STEP1: Enter [ST].
• Classic Mode : [/] key
• Standard Mode : [F9]key
• Enter Mode : [Esc] key
STEP2: Enter a command and then enter [DE].
• Classic Mode : Command + [Space] key
• Standard Mode : Command + [F8] key
• Enter Mode : Command + [Enter] key
STEP3: Enter first data and then enter [DE].
• Classic Mode : First data + [Space] key
• Standard Mode : First data + [F8] key
• Enter Mode : First data + [Enter] key
Second data is displayed.
STEP4: Enter [CCC].
• Classic Mode : “CCC” + [Enter] key
• Standard Mode : [F10] key
• Enter Mode : [Delete] key
System data (second data) has now been reset to its default.
To Next Page
Loading...
