Chapter 6 Command Mode
6-9 NWA-033628-001 Rev.1.0
Using Command Mode
Command Screen Preferences
The [Command] screen operation and displays can be modified through the following [Advanced]
screen. Click the [Advanced] button in the [Command] screen to display the [Advanced] screen.
Continued on next page
No. Item Description
(1) Input Mode Choose from the following Command entry modes as a control code of
entry mode:
• Classic/Standard/Enter (default: Standard)
For more details, refer “<Control Code List>”. Page 6-4
(2) [ForeColor] button Click to change the color of the character in the command entry Con-
sole. The [Color] dialog box is displayed.
For more details, refer “<Color Settings>”. Page 6-10
(3) Font, size Displays the font and size of characters used for character entry into the
command entry console.
(4) [Select Font] but-
ton
Click to change the font and character size of the command entry con-
sole. The [Font] dialog box is displayed.
For more details, refer “<Font Settings>”. Page 6-11
(5) [BackColor] but-
ton
Click to change the background color of the command entry console.
The [Color] dialog box is displayed.
For more details, refer “<Color Settings>”. Page 6-10
(1)
(2)
(4)
(3)
(7)
(5)
(6)
(8)
(9)
To Next Page
Loading...
