Netafim nmc-pro - Quantity Dosing

NMC-PRO
User Manual
Page 13
PROGRAM MENU
2.2.4 53BQuantity
The Quantity method injects a fixed amount of fertilizer in the irrigation water. When using the Quantity method, there
are two options:
• Option A: Bulk (similar to Time method). In this option, fertilizer is injected once, with the quantity defined in
this screen.
Example: Channel 1, P1 = four liters in one pulse
• Option B: Spread (according to dosing configuration set by a technician). Option B is similar to Proportional
Time. In this method, fertilizer is spread out by quantity over the irrigation run time.
Example: Channel 1 = P1 + P2 + P3…+ Pn = 4 liters

Note: The example below shows liters; in the USA use gallons.
Qty.
When installing the NMC Pro Controller, the installation technician selects the required option. The user defines the
quantity in the above screen.
DOSING PROGRAM
Program: 1
INJECTION PER DOSING CHANNEL
1
EC
4.00
2
EC
5.00
3
ACID
2.00
---
---
---
EC Dosing Method
PH Dosing Method
QTY.
QTY.
DOSING PROGRAM
Program: 1
INJECTION PER DOSING CHANNEL
1
EC
00:10
2
EC
00:00
3
ACID
0.00
---
---
---
EC Dosing Method
PH Dosing Method
P.TIME
P.QTY
P. TIME
TIME
QTY.