User Manual
Page 20
2.3.2 Adjusting the Water Quantity Based on Weather Conditions
The NMC Irrigation Pro enables you to manually increase or decrease the quantity of water on any given day.
Depending on the weather conditions, you can change the quantity of water emitted from valves without changing the
program.
Example 4: Increasing Irrigation
In this example, water is supplemented by 20% to compensate for an increase in heat. If the regular run time is 10
minutes, the actual run time will be 12 minutes. All other specifications are the same as those found in Example 3.
Note: The change to the programs affects both Valves 1 and 2, and Valve 3.
Note: Dosing is not affected when using this function, only the quantity of water.
There are two options:
• Daily: Program adjustment is for one day only. Regular program resumes the following day.
• Const: Program adjustment continues until changed.
DATE : 19-Apr-07 TIME : 16:12:32
IRRIGATION PROGRAM
Program: 4 Priority:
Daily 20%
Clock Start
2 2
Run Time #
Dosing Prog
1 1 2
1 1 2
Day: 01/01
Dose/Water
1 2 3
D W -
To Next Page
Loading...
Need help?
General
