Netafim nmc-pro - General Information; Keyboard Overview; Hot Screens

NMC-PRO
User Manual
Page 5
GENERAL INFORMATION
1 0BGENERAL INFORMATION
• Keyboard
• Hot Screens
• Main Menu Icons
• Introduction to Irrigation Programs
• Operation Mode
1.1 5BKeyboard
Numer keys: Use these keys to enter values or quantities. In addition, they act as
shortcuts to selections (see the following section).
+/- Key: Toggles between positive and negative values and marks check boxes' option
selection. In a History screen, use this key to toggle between quantities and time
format.
Arrows: Scroll up, down, left, and right to select menus.
MENU: Press to get to the main menu; also acts as "ESC" and "Back" keys.
ENTER: Enter menu, submenu, value, open window, and confirm a value or change.
ZONE LOG IN: Access Mode
DELETE: Erases s typing mistake.
1.2 6BHot Screens
Press MENU from the Main Menu to see Read-Only overview running processes. Press MENU again to return to the
Main Menu.
There are 10 Hot Screens/Keys:
• 0: Hot Key- Icon of active actions/processes
• 1: Main Screen/System Status
• 2: Irrigation Process
• 3: Irrigation Program Status
• 4: Water, EC/pH, Dosing
• 5: Filter Flushing Status
• 6: Temperature & Humidity measurement
• 7: Weather Station measurement
• 8: System Pressure
• 9: Drain Status