User Manual
Page 7
1.4 8BIntroduction to Irrigation Programs
To set an irrigation program-regiment/strategy, the grower must select the necessary valves and set the Run Time
and Dosing programs. The grower can define one or more programs for one or more valves. Refer to PROGRAM
MENU, page 9 for detailed information on these programs.
• Run Time Programs
Based on Time or Quantity
Set water before and after dosing process (fertilizer injection)
• Dosing Programs (Fertilizer)
Up to eight dosing channels per program
Each channel can be defined by:
o Quantity
o Proportional Quantity
o Time
o Proportional Time
• Irrigation Timing Based on External Condition Programs
Supports up to 15 programs
Each program defines:
o Time frame
o Trigger
o Trigger Type (for example one time only or multiple shots)
1.5 9BOperation Mode
There are three operation levels:
• Read Only (restricted): All the parameters and menus are visible, but cannot be modified
• User (partially restricted): Menus 1-6 are fully accessible and can be modified. Menus 7 and 8 can be
viewed but not modified
• Technician (unrestricted): All menus are fully accessible (no restrictions)
To Next Page
Loading...
