User Manual
Page 59
5.11
Sensor Log
The Sensors Log table includes history of average measurements of logged sensors. In order to define which sensor
to log, the user should access menu 6.8 – Sensor Logging, and mark by +/- button the required sensor.
In order to define the measurement interval, the user should go to menu 6.2 and choose the required History
resolution.
The Sensors Log table contains up to 10,000 data fields. Date and time are two fields per line and every sensor is an
additional field.
For example: logging of two sensors uses four data fields; two for time and date and one for each sensor. In this case,
the table will consist of a maximum of 2,500 lines.
5.12
Event Log
The table provides information of all the processes performed by the NMC-Pro including their time and date.
5.13
System Log
This table provides information of all the system changes.
The table consists of the last 999 events
Examples of system changes are changes of triggered by the controller, the PC communication, a power off, etc.
SYSTEM LOG
2
3
4
5
6
7
8
9
10
Reset Alarm
PC Table #1.3 Change
PC Irri. Prog #1 Ch.
PC Irri. Prog #1 Ch.
Irrig. Prog #1 Ch.
Irrig. Prog #2 Ch.
Table #7.7 Change
Table #1.3 Change
Table #1.7 Change
20/Dec
20/Dec
20/Dec
20/Dec
20/Dec
20/Dec
20/Dec
20/Dec
20/Dec
09:03
09:04
09:04
09:04
09:04
09:05
09:21
09:23
09:25
SENSORS LOG
Hum.
1
2
10/Aug
10/Aug
10/Aug
10/Aug
10/Aug
10/Aug
10/Aug
16:27
16:26
16:26
16:25
16:24
16:23
16:22
22.7
22.7
22.7
22.7
22.7
22.7
22.7
22.7
22.7
22.7
22.7
22.7
22.7
22.7
----
----
----
----
----
----
----
EVENT LOG
No. Event Date Time
1
2
3
4
5
6
7
8
9
Water
Leak # 4
Program
Manual
On
Valve
#51
Manual
20/Dec
20/Dec
20/Dec
20/Dec
20/Dec
20/Dec
20/Dec
20/Dec
20/Dec
09:01
09:03
09:04
09:04
09:04
09:04
09:05
09:21
09:23
To Next Page
Loading...
Need help?
General
