Netafim nmc-pro User Manual

NMC-PRO
User Manual
Page 16
PROGRAM MENU
2.2.5 54BEC Pre-Control
Use this option in hydraulic pre-control systems in greenhouses. When collecting excess water from drains, the
grower can set an EC target before water goes through an irrigation system. This method reuses excess fertilizer and
water, recycling them for a second irrigation run.

Note: An EC Pre-Control valve relay must be defined by a technician at installation.
EC Pre-Control ON (this enables
the control)
Define pre-controlled EC target
DOSING PROGRAM
Program: 1
EC Pre-Control: ON
INJECTION PER DOSING CHANNEL
1
EC
2.00
2
EC
5.00
3
ACID
3.00
---
---
---
Target EC
Target PH
EC Dosing Method
PH Dosing Method
1.50
5.50
P.QTY
P.QTY
OFF
ON
DOSING PROGRAM
Program: 1
EC Pre-Control:
INJECTION PER DOSING CHANNEL
1
EC
2.00
2
EC
5.00
3
ACID
3.00
---
---
---
Target EC
Target PH
Target EC Pre-Control
EC Dosing Method
PH Dosing Method
1.50
5.50
0.80
P.QTY
P.QTY
DOSING PROGRAM
Program: 1
EC Pre-Control: ON
INJECTION PER DOSING CHANNEL
1
EC
2.00
2
EC
5.00
3
ACID
3.00
---
---
---
Target EC
Target PH
Target EC Pre-Control
EC Dosing Method
PH Dosing Method
1.50
5.50
-----
P.QTY
P.QTY

Netafim nmc-pro Specifications

General

Brand	Netafim
Model	nmc-pro
Category	Controller
Language	English