Netafim nmc-pro User Manual

NMC-PRO
User Manual
Page 19
PROGRAM MENU
Example 3: Irrigation Program for a Group and Individual Valve
In this example, Valves 1 and 2 are designated as a group. Valve 3 is designated as an individual valve. There are
different/interchangeable delays (multiple start time) dividing the day into periods.
The first cycle’s (C1) run time begins at 8:00 (Valve 1 and 2). Valve 3 begins operating at its run time. In this example,
Valve 3 begins operating after Valve 1 and 2 finishes. This process is repeated once (C2), with a break of one hour
between cycle start times.
Cycle 3 (C3) begins at 10:30. In this cycle, there is a 30 minute break between cycles (C4). The process continues as
shown in the graph below.
DATE : 19-Apr-07 TIME : 16:12:32
IRRIGATION PROGRAM
Program: 4
Priority:
Const. 0%
Start Time
Clock Start
Min. Time
08:00 10:30 12:30
2 2 2
01:00 00:30 01:00
Valve #
Run Time #
Dosing Prog
001 + 002 003
1 1 2
1 1 2
Day: 01/03
Dose/Water
1 2 3
D W D
DATE : 19-Apr-07 TIME : 16:12:32
IRRIGATION PROGRAM
Program: 4
Priority:
Const. 0%
Start Time
Clock Start
Min. Time
08:00
2
01:00
Valve #
Run Time #
Dosing Prog
001 + 002
1 1
1 1
Day: 01/01
Dose/Water
1
D

Netafim nmc-pro Specifications

General

Brand	Netafim
Model	nmc-pro
Category	Controller
Language	English