NETGEAR FSM726S User Manual

Page 10 of 121
Features
The following list identifies the key features of the NETGEAR Model FSM726S Managed Stackable Switch.
• Twenty-four (FSM726S) or forty-eight (FSM750S) 10/100 Mbps auto sensing Fast Ethernet switching ports
• Two Gigabit Ethernet ports that can be used either through the built-in RJ-45 ports for 10/100/1000 Mbps connectivity or through the GBIC
modules for a variety of fiber connections
• Two, built-in gigabit speed stacking ports for network expandability and scalability up to 144 10/100 ports, using either FSM726S or
FSM750S or a combination of them
•
Full Layer 2 switch management including:
o
SNMP
o
RMON (groups 1,2,3 and 9)
o
IEEE 802.1Q (up to 64 Static VLAN groups)
o
IEEE 802.1p (Class of Service)
o
IEEE 802.1D (Spanning Tree)
o
Port Trunking - Manual as per IEEE802.3ad Link Aggregation.
o
IGMP snooping
o
Port Mirroring
o
Password access control
o
TFTP firmware upgrade
o Multiple interfaces: Browser-based, Telnet, or SNMP application
• Full compatibility with IEEE standards:
o
IEEE 802.3i, (10BASE-T)
o
IEEE 802.3u (100BASE-TX)
o IEEE 802.3ab (1000BASE-T)
o IEEE 802.3x (full-duplex flow control)
• Auto-sensing and auto-negotiating capabilities for all ports
• Auto Uplink™ on all ports to make the right connection
• Automatic address learning function to build the packet-forwarding information table. The table contains up to 8,000 media access control
(MAC) addresses (that is, the switch can support networks with as many as 8,000 devices).
• Full- and half-duplex functions for all 10/100 ports
• Store-and-Forward transmission to remove bad packets from the network
• Active flow control to minimize packet loss/frame drops:
o
Half-duplex back-pressure control
o
Full-duplex IEEE 802.3x pause frame flow control
• LED indicators for port status monitoring:
o
Power LED to indicate power on/off status
o
Link LED to indicate link status and activity
o
Dual-color Mode LED to indicate speed, activity, duplex mode, and collision
o
Stacking LED to indicate link status, activity, and master/slave status
• Easy migration from existing 10 Mbps network to 100 Mbps Fast Ethernet network
• Easy upgrade path to add gigabit technology to your network
• Flexible installation:
o
Standalone desktop installation
o
19-inch standard rack-mount
• Standard 1U case size (FSM726S) or 2U case size (FSM750S)

NETGEAR FSM726S Specifications

General

Brand	NETGEAR
Model	FSM726S
Category	Switch
Language	English