Page 35 of 121
The initial screen depends on if password protection has been enabled. If it has, it is the welcome screen, seen below in Figure 6-2. If there is no
password set on the system, the Main Menu will be displayed and access is granted immediately. By default, password protection is disabled. If
enabled, the default password is ‘1234’.
To enable password protection:
o Choose Security from the Main Menu
o
Toggle Password Protection to Enabled
o
Enter and verify new password
o
Save with Ctrl-W
Figure 6-2 Initial Welcome screen of User Interface (Password enabled)
To Next Page
Loading...
Need help?
General