Page 60 of 121
Main Menu> Advanced Menu> MAC Address Manager> Static Addresses
The Static Addresses Table, allows the administrator to specify Media Access Control (MAC) addresses for specific ports that will not be purged
from the bridge table by the aging function.
Add an entry
o
Type the MAC address under the first column, and hit Enter.
o
Enter the port number, which is associated with the MAC address.
If all the information is correct, the new entry will appear in the list below, which is in order by port ID. Otherwise, an error message will be displayed
and the cursor will return to the MAC Address field.
Remove an entry
o
Tab down to the entry and press Ctrl-X. This will erase the MAC address from NVRAM. You do not need to save (hit Ctrl-W).
Figure 6-25: MAC: Static Address
To Next Page
Loading...
Need help?
General