NETGEAR WNDAP360 - Page 127

Command-Line Reference
127
ProSafe Dual Band Wireless-N Access Point WNDAP360
|-exit --logout from CLI
|-file --
|-firmware-upgrade --upload new system firmware file
|-password
--system password
|-restore-configuration --restore system configuration
|-restore-default-password --restore default system password
|-show> --show system settings
| |-configuration --show system configuration
| |-interface>
--show wireless lan interface
| | |-eth> --ethernet interface
| | | |-statistics --show ethernet statistics
| | |
| | |-wlan> --wlan interface settings
| | | |-2.4GHz> --2.4GHz wlan interface settings
| | | | |-configuration
--interface configuration
| | | | |-knownaplist --known access point list
| | | | |-stationlist --station list
| | | | |-statistics --interface statistics
| | | | |-trusted-stationlist --trusted
station list
| | | | |-unknownaplist --unknown access point list
| | | |
| | | |-5GHz> --5GHz wlan interface settings
| | | | |-configuration --interface configuration
| | | | |-knownaplist --known access point list
| | | | |-stationlist
--station list
| | | | |-statistics --interface statistics
| | | | |-trusted-stationlist --trusted station list
| | | | |-unknownaplist --unknown access point list
| | | |
| | |
| |
| |-log
--system log
| |-system --system setting