NETGEAR WNDAP360 User Manual

Introduction
7
ProSafe Dual Band Wireless-N Access Point WNDAP360
range of another. As a result, wireless clients can freely roam from one wireless access point
to another and still maintain seamless connection to the network.
The autosensing capability of the ProSafe Dual Band Wireless-N Access Point WNDAP360
a
llows packet transmission at up to 300 Mbps, or at reduced speeds to compensate for
distance or electromagnetic interference.
What Is In the Box?
The product package should contain the following items:
• ProSafe Dua
l Band Wireless-N Access Point WNDAP360
• Power ada
pter and cord (12 VCD, 1.0A)
• S
traight-through Category 5 Ethernet cable
• ProSafe Dua
l Band Wireless-N Access Point WNDAP360 Installation Guide
• Resou
rce CD, which includes this manual
• W
all-mount kit made up of brackets and hardware
Contact your reseller or customer support in your a
rea if there are any missing or damaged
parts.
Refer to the NETGEAR website at http://kbserver.netgear
.com/main.asp for the telephone
number of customer support in your area. You should keep the Inst
allation Guide, along with
the original packing materials, and use the packing materials to repack the wireless access
point if you need to return it for repair.
To qualify for product updates and product warranty
, NETGEAR encourages you to register
on the NETGEAR website at http://my.netgear.com/r
egistration/login.aspx.
System Requirements
Before installing the wireless access point, make sure that your system meets these
requirements:
• A 10/10
0/1000 Mbps local area network device such as a hub or switch
• The Cate
gory 5 UTP straight-through Ethernet cable with RJ-45 connector included in the
package, or one like it
• A 100–
120V, 50–60 Hz AC power source
• A W
eb browser for configuration, such as Microsoft Internet Explorer 6.0 or later, or
Mozilla 1.5 or later
• At lea
st one computer with the TCP/IP protocol installed
• An 802
.11a/n or 802.11b/g/n-compliant device, such as the NETGEAR® RangeMax™
Wireless-N Dual Band USB Adapter WNDA3100v2.

NETGEAR WNDAP360 Specifications

General

VLAN support	Yes
Frequency band	2.4 - 5 GHz
Number of users	50 user(s)
Cabling technology	10/100/1000BASE-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1000 Mbit/s
Antenna connector type	SMA
Antenna gain level (max)	5 dBi
Weight (imperial)	1.93 lbs
Networking features	Gigabit Ethernet
Compliance industry standards	IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE802.1x
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	64-bit WEP, 128-bit WEP, EAP, EAP-TLS, EAP-TTLS, PEAP, SSH, SSL/TLS, TTLS, WEP, WPA, WPA2
Power requirements	12 VDC, 1A
Power consumption (typical)	10.51 W
Minimum system requirements	Internet Explorer 6.0, Mozilla Firefox 1.5
Compatible operating systems	- Windows Vista, XP, 2000, 98, Me - Mac OS - UNIX - Linux
Internal	No
LED indicators	LAN
Cable lock slot type	Kensington

Weight and Dimensions

Height	54.76 mm
Weight	878 g
Dimensions (WxDxH)	253.75 x 253.76 x 54.76 mm