NETGEAR WNDAP360 - Command-Line Reference

115
B
B. Command-Line Reference
The ProSafe Dual Band Wireless-N Access Point WNDAP360 can be configured through either
the command-line interface (CLI), a Web browser, or a MIB browser.
The CLI allows viewing and modification of the configu
ration from a terminal or computer through
a Telnet or SSH connection.
Keyword Description
-------------------------------------- ----------------------
|-backup-configuration --backup configuration
|-config> --configuration setting
| |-apname --access point name
| |-country
--country/region
| |-dhcp> --DHCP server
| | |-dns-server --DNS server
| | |-gateway --default gateway
| |
|-ip-address --IP range
| | |-lease-time --lease time
| | |-status --status
| | |-subnet-mask --subnet mask
| | |-wins-server
--WINS server
| |
| |-http-redirect --enable HTTP redirection
| |-http-redirect-url --HTTP redirection URL
| |-interface> --select wireless lan interface
| | |-wlan>
--wireless LAN interface setting
| | | |-2.4GHz> --2.4 GHz wireless LAN interface setting
| | | | |-aggregation-length --aggregated packet size
| | | | |-ampdu --aggregated MAC Protocol Data Unit
| | | |
|-beacon-interval --wireless beacon period in TU(1024 us)
| | | | |-channel --wireless channel (depends on country and wireless mode)
| | | | |-channelwidth --wireless channel width
| | | | |-dtim-interval --wireless DTIM period in
beacon interval
| | | | |-extension-protection-spacing --wireless extension protection spacing
| | | | |-fragmentation-length --wireless fragmentation threshold(even only)
| | | | |-guardinterval --interval (from interference from other transmissions)
| | | | |-knownap-add --add known access point
| | | | |-knownap-del
--delete known access point