NETGEAR WNDAP360 User Manual

Installation and Basic Configuration
23
ProSafe Dual Band Wireless-N Access Point WNDAP360
3. Click Apply to save your settings.
Configure Basic Wireless Settings
For proper compliance and compatibility between similar products in your coverage area, you
need to correctly configure the 802.11b/g/n and 802.11a/n wireless adapter settings,
including the operating channel and country. You also need to correctly configure the basic
wireless network settings for wireless devices to connect to your network. For other wireless
features, including wireless security, see Chapter 3, Wireless Configuration and Security.
WARNING!
If you configure the wireless access point from a wireless
computer and you change the wireless access point’s SSID,
channel, or wireless security settings, you will lose your wireless
connection when you click Apply. You then need to change the
wireless settings of your computer to match the wireless access
point’s new settings.
Configure 802.11b/bg/ng Wireless Settings
 To configure the 802.11b/g/n wireless settings:
1. Select Con
figuration > Wireless > Basic > Wireless Settings. The basic Wireless
Settings screen displays. (The following figure shows the 11ng settings.)
Primary DNS Address Enter the IP address of the primary Domain Name Server (DNS) server
available to DHCP clients.
Secondary DNS Address Enter the IP address of the secondary DNS server available to DHCP clients.
Primary WINS Server Enter the IP address of the primary WINS server for the network.
Secondary WINS Server Enter the IP address of the secondary WINS server for the network.
Lease Enter the period that the DHCP server grants to DHCP clients to use the
assign
ed IP addresses. The default time is 1 day.
Table 5. DHCP Server Settings (Continued)
Field Description

NETGEAR WNDAP360 Specifications

General

VLAN support	Yes
Frequency band	2.4 - 5 GHz
Number of users	50 user(s)
Cabling technology	10/100/1000BASE-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1000 Mbit/s
Antenna connector type	SMA
Antenna gain level (max)	5 dBi
Weight (imperial)	1.93 lbs
Networking features	Gigabit Ethernet
Compliance industry standards	IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE802.1x
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	64-bit WEP, 128-bit WEP, EAP, EAP-TLS, EAP-TTLS, PEAP, SSH, SSL/TLS, TTLS, WEP, WPA, WPA2
Power requirements	12 VDC, 1A
Power consumption (typical)	10.51 W
Minimum system requirements	Internet Explorer 6.0, Mozilla Firefox 1.5
Compatible operating systems	- Windows Vista, XP, 2000, 98, Me - Mac OS - UNIX - Linux
Internal	No
LED indicators	LAN
Cable lock slot type	Kensington

Weight and Dimensions

Height	54.76 mm
Weight	878 g
Dimensions (WxDxH)	253.75 x 253.76 x 54.76 mm