EasyManuals Logo

NETGEAR WNDAP360 User Manual

NETGEAR WNDAP360
137 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
Management
72
ProSafe Dual Band Wireless-N Access Point WNDAP360
Monitor Wireless Stations
The Wireless Stations screen contains the Available Wireless Stations table. This table shows
all IP devices that are associated with the wireless access point in the wireless network that
is defined by the wireless network name (SSID). The table heading indicates the wireless
mode (802.11b, 802.11bg, or 802.11ng and 802.11a or 802.11na).
Note: A wireless network can include multiple wireless access points, all
using the same network name (SSID). This extends the reach of the
wireless network and allows users to roam from one wireless access
point to another, providing seamless network connectivity. Under
these circumstances, be aware that the Available Wireless Stations
table includes only the stations associated with this wireless access
point.
To view the attached wireless stations, and to view details for a wireless station:
1. Select Mon
itoring > Wireless Stations. The Wireless Stations screen displays:
Current Wireless Settings for 802.11n/a
Access Point Mode The operating mode of the wireless access point. One of the following modes is
indicated:
• Access Point
• Point-to-Point Bridge
• Point-to-Point Bridge with Access Point
• Multi-Point Bridge with/without client association
For information about how to change the mode, see Configure Wireless Bridging on
page 89.
Channel / Frequency The channel the wireless port is using. For information about how to change the
cha
nnel and frequency, see Configure 802.11a/na Wireless Settings on page 27.
Rogue AP Detection Enabled indicates that rogue AP detection is enabled; Disabled indicates that it is not.
Table 18. System Screen Fields (Continued)
Field Description

Table of Contents

Other manuals for NETGEAR WNDAP360

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WNDAP360 and is the answer not in the manual?

NETGEAR WNDAP360 Specifications

General IconGeneral
VLAN supportYes
Frequency band2.4 - 5 GHz
Number of users50 user(s)
Cabling technology10/100/1000BASE-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate1000 Mbit/s
Antenna connector typeSMA
Antenna gain level (max)5 dBi
Weight (imperial)1.93 lbs
Networking featuresGigabit Ethernet
Compliance industry standardsIEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE802.1x
WAN connectionEthernet (RJ-45)
Ethernet LAN (RJ-45) ports1
Security algorithms64-bit WEP, 128-bit WEP, EAP, EAP-TLS, EAP-TTLS, PEAP, SSH, SSL/TLS, TTLS, WEP, WPA, WPA2
Power requirements12 VDC, 1A
Power consumption (typical)10.51 W
Minimum system requirementsInternet Explorer 6.0, Mozilla Firefox 1.5
Compatible operating systems- Windows Vista, XP, 2000, 98, Me - Mac OS - UNIX - Linux
InternalNo
LED indicatorsLAN
Cable lock slot typeKensington
Weight and Dimensions IconWeight and Dimensions
Height54.76 mm
Weight878 g
Dimensions (WxDxH)253.75 x 253.76 x 54.76 mm

Related product manuals