NETGEAR WNDAP360 User Manual

Supplemental Information
112
ProSafe Dual Band Wireless-N Access Point WNDAP360
Factory Default Settings
You can use the Reset button located on the rear of the wireless access point to reset all
settings to their factory defaults. This is called a hard reset.
To perform a hard reset, use a sharp object to push and hold the Reset bu
tton for
approximately 5 seconds (until the Test LED blinks rapidly). This retu
rns the wireless access
point to the factory configuration settings that are shown in the following table.
Note: Pressing the Reset button for a shorter period of time simply causes
the wireless access point to reboot.
Management and Other Specifications
Network management • Remote configuration and management through the web management interface,
through SNMP, or through Telnet or SSH with the command-line interface (CLI)
• SNMP management supports SNMP MIB I, MIB II, 8
02.11 MIB and proprietary
configuration MIB
Maximum clients Limited by the amount of wireless network tra
ffic generated by each node; a
maximum of 64 clients is supported.
Status LEDs • Power/Test LED
• Link speed LED
• Ethernet LAN
• Wireless LAN (2.4 GHz and 5 GHz)
Electrical and Physical S
pecifications
Power adapter 12 VDC, 1A; plug is localized to country of sale
Physical specifications • Dimensions (h x w x d): 253.75 x 253.75 x
54.76 mm (10.0 x 10.0 x 2.16 in)
• Weight: 0.886 kg (1.95 lb)
Environmental
spe
cifications
Operating temperature: 0 to 55° C (32 to 131° F)
Operating humidity: 10–9%, noncondensing
Compliance
Note: For more information about compliance, see Appendix C, Notification of Compliance.
Electromagnetic
complianc
e
FCC Part 15 Class B and Class E, CE, and C-TICK
Table 29. Technical Specifications WNDAP360 (Continued)
Feature Description

NETGEAR WNDAP360 Specifications

General

VLAN support	Yes
Frequency band	2.4 - 5 GHz
Number of users	50 user(s)
Cabling technology	10/100/1000BASE-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1000 Mbit/s
Antenna connector type	SMA
Antenna gain level (max)	5 dBi
Weight (imperial)	1.93 lbs
Networking features	Gigabit Ethernet
Compliance industry standards	IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE802.1x
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	64-bit WEP, 128-bit WEP, EAP, EAP-TLS, EAP-TTLS, PEAP, SSH, SSL/TLS, TTLS, WEP, WPA, WPA2
Power requirements	12 VDC, 1A
Power consumption (typical)	10.51 W
Minimum system requirements	Internet Explorer 6.0, Mozilla Firefox 1.5
Compatible operating systems	- Windows Vista, XP, 2000, 98, Me - Mac OS - UNIX - Linux
Internal	No
LED indicators	LAN
Cable lock slot type	Kensington

Weight and Dimensions

Height	54.76 mm
Weight	878 g
Dimensions (WxDxH)	253.75 x 253.76 x 54.76 mm