User Manual MX Series Voice Gateway
22 www.newrocktech.com
Advanced > Security
System tool > Change password
System tool > Software upgrade
System tool > Import data
System tool > Export data
After login, "Welcome user” is displayed on the upper left corner of the interface.
The gateways allow multiple users to log in if needed.
When multiple administrators log in, the first can modify, while others may only browse.
The system will confirm timeout if users do not conduct any operation within 10 minutes after
login. They are required to log in again for continuing operations.
Upon completion of configuration, click the Logout button to return to the login page, so as not to
affect the login permission of other users.
To ensure system security, please choose Tools > Change password and change the password
when you log in for the first time. For details, see 2.10.1 Change Password.
2.2 Buttons Used on Gateway Management Interface
A save button is at the bottom of each configuration interface. It is used to submit configuration
information. Users should click the Save button after the completion of parameter configuration on a
page. A success prompt will appear if configuration information is accepted by the system; if The
configuration takes effect after the system is restarted dialog box appears, it means that the parameters
are valid only after a system restart. It is recommended that users press the Reboot button on the top right
corner to enable the configuration after changing all parameters to be modified.
2.3 Basic Configuration
2.3.1 Status
After login, open the Basic tab page to view device information. If the SIP port of the device is 5060, you
are advised to modify it.
To Next Page
Loading...
