MX Series Voice Gateway User Manual
New Rock Technologies, Inc. 73
Define the function key of dial, with default of *74. This key allows the user to build a table of
2-digits (20~49) speed-dial numbers.
Note: It is necessary to get the dial-up service under way before applying this function (please
see Phone for instructions on assigning the feature to the phone).
User operation: upon dialing the function key (*74), dial the two-digit speed dial followed by
the expanded number terminated with #.
The prefix number for applying abbreviated dialing, with default of **. The prefix should be
added in front of abbreviated dialing numbers when using abbreviated dialing.
User operation: off hook → dial the prefix number of abbreviated dialing (**) and dial
abbreviated dialing number (20).
The function key for cancelling the call waiting feature for next call, with default of *64.
Dialing this function key will temporarily disable the call waiting function for the next phone
call.
Note: The function key works only for single cancel, to cancel the call waiting complete,
please refer to Table 2-12 about configuration of subscriber line.
The function key of blind call transfer, with default of *38.
User operation: during the call, tap the phone hook switch or press R button→ dial *38→ dial
the called number and then hang up.
The function key for listening to the color ring, with default of *88.
User operation: off hook → press *88 → input color ring number.
While listening, you can press a two-digit CRBT index to change to another CRBT file.
The default value is *79.
2.7.15 Clock Service
After login, click Advanced > System time to open this interface.
Figure 2-54 Clock Service Interface
To Next Page
Loading...
