User Manual MX Series Voice Gateway
72 www.newrocktech.com
Table 2-33 Feature Codes Configuration Parameter
The function key for obtaining the IP address of gateway, with a default of ##.
When this function key is dialed, the phone will play the device IP address, the web port
number for accessing the device, the IP address of the gateway, the subnet mask, and the
system software version number.
Note: If the device has only the FXO port, you can use Finder, a tool developed by New Rock,
to obtain the IP address.
If you want to have a copy of Finder, please send an email to gs@newrocktech.com.
The function key for obtaining the phone number of the subscriber line, with default of #00.
By dialing this key, you will hear the phone number of the subscriber line voiced by the
gateway.
You can click to allow the change of the service feature codes, or deselect the checkbox
to not allow the change of the service feature code. By default, service feature codes are not
allowed to change.
The function key for activating unconditional call forwarding, with a default of *60. Dialing
this key will activate unconditional call forward of the line and set the destination number for
call forwarding. User operation: off hook → press *60 →enter the destination number.
Users can determine the latest destination number set by dialing *60*.
Note: It is required to enable call forwarding service before using this function (please see the
instructions on the relevant configuration of subscriber line).
The function key for deactivating unconditional call forwarding, with default of #60.
User operation: off hook → press #60 → hang up.
The function key for activating call forwarding when the line is busy, with default of *61.
Dialing this key may activate CFB, and specify the destination number. It is required to enable
call forwarding on busy service before using this function (See 2.4.2 Subscriber Line
Features).
The function key for deactivating call forwarding on busy, with default of #61.
User operation: off hook → press #61 → hang up.
The function key for activating call forwarding on no answer, with default of *62. Dialing the
function key should activate call forwarding on no answer and specify destination number.
Note: It is required to enable call forwarding on no answer service before using this function
(See 2.4.2 Subscriber Line Features).
The function key for deactivating call forwarding on no answer, with default of #62.
The function key for activating color ringback tone, with default of *80. Subscribers may
select their favorite color RB tone by using this key.
Note: It is required to start color ring service before using this function (See 2.4.2 Subscriber
Line Features for how to assign the feature to the phone).
User operation: upon off hook, the subscriber may press the function key (*80 by default), then
input the two-digit index numbers of color ring.
Dial *80* to listen to the color ring that has been previously set.
The function key for deactivating the color ring, with default of #80. The subscriber may use
such key to recover the normal ring of phone.
User operation: off hook → press #80 → hang up.
The function key for activating the double-ring/forking feature, with default of *75.
The function key for deactivating the feature, with default of #75.
Activate do not disturb (DND), with default of *72. With DND selected, the gateway will
reject all coming calls by sending busy tone to the callers.
Note: It is required to start DND prior to using this function (See 2.4.2 Subscriber Line
Features).
The function key to cancel DND, with default of #72. Dialing the function key may recover
normal ringing upon the arrival of incoming calls.
To Next Page
Loading...
