New Rock Technologies HX4E - Greeting

User Manual MX Series Voice Gateway
68 www.newrocktech.com
Name
Description
Encryption method
Set the gateway encryption method, default is 7. The optional parameters as below:
 2:TCP not encrypted
 3: TCP encrypted
 6: UDP not encrypted
 7: UDP encrypted
 8: Using keyword
 10: RC4
 13: Encrypt13
 14: Encrypt14
 16: Word reverse(263)
 17: Word exchange(263)
 18: Byte reverse(263)
 19: Byte exchange(263)
 20:VOS
Encryption key
You may obtain this from service provider
RTP encryption
Choose whether to encrypt RTP voice pack, the default is 0.
 0: no encryption
 1: entire message
 2: header only
 3: the data body only
T.38 encrypt
Select to encrypt T.38 fax media stream packets. By default, this is not selected.
Session Border
Proxy
Encryption method numbered 2, 3, 6 and 7 are used only when the device is connected to a New
Rock SBC.
SBC address
Set the IP address and port number of session border proxy server. The character “:” must be
used between IP address and port number.
Server address could be set into IP address or domain name. When a domain name is used, it is
required to configure DNS server on the "Basic > Network" page. Example: 201.30.170.38:1020
or sbc.com:1020.
Local port
Signaling port assignment of the gateway, the default value is 4660. Signaling port number may
be set at will, but cannot conflict with other ports of equipment.
2.7.12 Greeting
After login, click Advanced > Greeting to open the audio files interface.