New Rock Technologies HX4E - Figure 2-26 MGCP Configuration Interface

User Manual MX Series Voice Gateway
32 www.newrocktech.com
Figure 2-26 MGCP Configuration Interface
Table 2-9 MGCP Configuration Parameters
Name
Description
Local port
Configure the UDP port for transmitting and receiving MGCP messages, the default
value is 2427.
Note: The signaling port number can be set in the range of 1-9999, but cannot conflict
with the other port numbers used by the equipment.
Proxy server
Configure the IP address and port number of MGCP proxy server, separated by “:”. It
has no default value.
The address can be set to an IP address or a domain name according to the subscribers’
requirements. When a domain name is used, it is required to configure DNS server on
the "Basic > Network" page. Examples of complete and effective configuration:
46.33.136.50:2727 or www.proxy.com: 2727.
User agent domain name
The domain name associated with the call agent, it has no default value. DNS server is
required to set.
Example: www.gatewaymgcp.com.
Default event package
List all the types of default event packages supported by the HX4. Multiple package
names are separated by“,”.
The default value is L, D, G
L: Line Package
D: DTMF Package
G: Generic Media Package
Persistent line event
List the event types that the gateway can report, with multiple types separated by “,”.
When gateways process the events listed here, they will report to the call agent.
Note: This parameter must be set since there is no default value. The factory setting is
L/HD, L/HU:
L/HD: Offhook
L/HU: Onhook
FXO event package
Handset Package or Line Package